FujiFilm FinePixS5000 Service Manual page 64

4. Adjustments
---> The [Downloading Complete Screen (Fig.30)] appears.
<Step 3>
Follow the instructions on the [Downloading Complete Screen (Fig.36)], and do the following.
1. Remove the DC jack from the camera.
2. Press the Enter key.
---> The [Jig Mode Setup Screen (Fig.2)].
* The camera is started with the new firmware when power is switched OFF/ON.
<Step 4>
The [Jig Mode Setup Screen (Fig.2)], set the camera in the jig mode, and press the Enter key twice.
---> The [Firmware Version Check Screen (Fig.4)] appears.
(this screen displays the upgraded version)
<Step 5>
Press the enter key while in the [Firmware Version Check Screen (Fig.4)].
---> The [Adjustment Items Select Screen (Fig.5)] appears.
<Step 7>
Select another adjustment item on the [Adjustment Items Select Screen (Fig.5)] if necessary, or select End
setting if no more adjustments are required.
64
FinePix S5000 Service Manual
Fig.36