FujiFilm FinePixS5000 Service Manual page 49

FinePix S5000 Service Manual
<Step 6>
Select [F4] from the [Adjustment Items Select Screen (Fig.5)]. (press [F4] on the PC keyboard)
---> The [CCD Data Input Start Screen (Fig.11)] appears.
<Step 7>
Make the following preparations in accordance with the instructions on the [CCD Data input Start Screen
(Fig.11)].
1 Prepare a floppy disk for the CCD data for the camera to be adjusted.
2 Enter the eight-digits CCD serial No. in the dialog box (the '.dat' file extension need not be entered).
3 Insert the CCD data floppy disk in the floppy disk drive (A: drive).
When preparations are complete, press the Enter key.
Click on the [OK] button.
---> CCD Data input begins.
---> When adjustment is completed
satisfactorily, write the adjustment
data to the Flash_ROM.
---> When the adjustment data is written satisfactorily to the Flash ROM the [CCD Data Input Complete
Screen (Fig.12)] appears.
<Step 8>
Press the Enter key while in the [CCD Data input Complete Screen (Fig.12)].
---> The system returns to the [Adjustment Items Select Screen (Fig.5)].
Caution:
When CCD data input has been run, always ensure that adjustment is run in the following order. Camera adjustment --->
Flash adjustment.
Fig.12
4. Adjustments
Fig.11
49