Table of Contents
Advertisement
High Frequency Driver replacement continued:
1
4
1
4
9
This is what the high frequency driver
looks like removed from the horn
assembly. Four headless screws need
to be removed from the driver. Pliers
could help if the screws are too tight.
Turn counter-clockwise to loosen and
remove, clockwise to tighten.
2
3
2
3
10
Keep the four headless screws in a
safe place. Follow the same steps
as above, but backwards 9 to 1.
Power up the SR1521z and the new
driver should now be pumping out
those highs again. Fantastic, you just
replaced a high frequency driver!
9
Advertisement
Table of Contents
