LOUD Technologies SR1521z Repair Manual page 4

4
Led PCB replacement continued:
6
Carefully remove the led PCB assembly
from the back side of the grill. A fl at
head screwdriver may aid in removal of
the led PCB assembly if it is sticking.
7
The hard part is done, the rest is easy!
Place the new led PCB assembly (part
#0007334) where the old one was. Follow
the same steps as above, but backwards
6 to 1. Power up the SR1521z and the led
should light up. Congratulations, you just
replaced an led PCB assembly...now go
play some shows!