Table of Contents
Advertisement
High Frequency Driver replacement:
1
Follow steps 1-4 of the led PCB
replacement instructions, as the grill will
need to be removed in order to access
the high frequency driver.
1
4
2
Four screws need to be removed from
the horn using the 5mm allen wrench.
2
3
3
Keep the four screws and fl at washers in
a safe place.
4
Carefully begin to remove the entire
horn assembly (with the high frequency
driver still attached).
Caution:
The horn weighs about 5
pounds, and the weight is not evenly
distributed.
7
Advertisement
Table of Contents
