Table of Contents
Advertisement
Diaphragm replacement continued:
6
This is what the horn assembly looks like
with the diaphragm and plate adapter
removed. When replacing the new
diaphragm, be sure to line up the holes
correctly. Notice where the terminal
connections fi t (circled above).
7
The diaphragm is separated from the
plate adapter simply by pushing down
on terminals.
8
This is what the plate adapter (left) and
diaphragm (right) both look like. Place
the new diaphragm (part # coming
soon) where the old one was. Follow the
same steps as above, but backwards 7
to 1. Power up the SR1521z and the new
diaphragm should now be pumping
out those highs again. Sweet, you just
replaced a diaphragm!
11
Advertisement
Table of Contents
