Front Panel/Remote Control Description - Krell Industries FBI Owner's Reference Manual

Front Panel/Remote Control Description

See Figures 1 and 2 on page 12
POWER
ANALOG
SOURCE
COMPONENTS
Krell FBI
Power, analog input selections, and volume control accessed via
the FBI front panel buttons or remote control keys are described
below. The front panel display shows volume and balance levels,
and Theater Throughput status. Most front panel functions also are
activated via the keys on the remote. The volume adjustment func-
tion, a special operational feature of the remote control only, is
described on page 16:
1 Power Button or Key
Use this button or key to switch the FBI between the stand-by
and the operational modes.
2 Power Indicator
The blue power indicator illuminates when the FBI is in the opera-
tional mode. The blue power indicator also flashes when any
remote control key is pressed.
3 Stand-by LED
The amplifier is in the stand-by mode and ready to be switched to
the operational mode, when the FBI is plugged into a standard
AC wall receptacle, the back panel power breaker switch (24) is in
the up position, and the red stand-by LED illuminates.
4 Infrared Sensor
The infrared sensor receives commands from the FBI remote con-
trol. For proper remote control operation, make sure that nothing
is obstructing the infrared sensor.
5 C-1 Button, Key, and LED
Selects a CAST source component (C-1) via a CAST connector.
When the button or key is selected, the red LED illuminates.
6 B-1 Button, Key, and LED
Selects a balanced analog source component via an XLR connec-
tor. When the button or key is selected, the red LED illuminates.
7 S-1, S-2, and S-3 Buttons, Keys, and LEDs
Selects a single-ended analog source component via single-
ended RCA connectors. When the button or key is selected, the
red LED illuminates.
13