Advertisement
SHORT CUTS TO PERFECT FLAT
TOPS, CREW CUTS, ETC.
Always cut from the back of the neck to the
crown, using the longest comb setting. Hold
the comb attachment flat against the head
and slowly move the clipper up through the
hair. Use the same technique for the sides,
cutting from the bottom to the upper side of
the head.
USER-MAINTENANCE
INSTRUCTIONS
CARE OF YOUR CLIPPERS
IF YOU DETERMINE THAT BLADE
ALIGNMENT IS INCORRECT:
Conair
hair clippers are carefully inspected
®
to insure that the blades are in perfect
alignment. You will need to realign the blades
after removing them for cleaning or replace-
ment, or if they should be knocked out of
alignment. How can you tell if the blades need
realigning? Simply match them up, point for
point, to conform with the below drawing.
Bottom Blade
Top Blade
1. To prevent the clipper from contacting the
skin or cutting too closely, make certain
that the end top blade teeth are
/
" back from bottom blade.
1
16
2. Position the extreme left-hand tooth of
the top blade so that it either covers, or
appears on the left of the first small tooth
on the bottom blade.
3. Make sure that the big tooth on the
bottom blade touches the extreme right-
hand tooth on the top blade.
/
/
1
1
" to
"
32
16
/
" to
1
32
Advertisement
