Advertisement
SHORT CUTS TO PERFECT FLAT
TOPS, CREW CUTS, ETC.
Always cut from the back of the neck to the
crown, using the longest comb setting. Hold
the comb attachment flat against the head and
slowly move the clipper up through the hair. Use
the same technique for the sides, cutting from
the bottom to the upper side of the head.
USER-MAINTENANCE
INSTRUCTIONS
CARE OF YOUR CLIPPERS
IF YOU DETERMINE THAT BLADE
ALIGNMENT IS INCORRECT:
Conair
hair clippers are carefully
®
to insure that the blades are in perfect
alignment. You will need to realign the blades af-
ter removing them for cleaning or replacement,
or if they should be knocked out of alignment.
How can you tell if the blades need realigning?
Simply match them up, point for point, to con-
form with the below drawing.
Bottom Blade
Top Blade
1. To prevent the clipper from contacting the skin
or cutting too closely, make certain that the
end top blade teeth are
from bottom blade.
2. Position the extreme left-hand tooth of
the top blade so that it either covers, or
appears on the left of the first small tooth on
the bottom blade.
3. Make sure that the big tooth on the
bottom blade touches the extreme right-
hand tooth on the top blade.
inspected
/
/
1
1
" to
"
32
16
/
" to
/
" back
1
1
32
16
Advertisement
