Download Print this page

User Maintenance Instructions - Conair GMT101WBC Instruction Booklet

Beard & mustache trimmer

Advertisement

for household use only
operaTing insTrucTions:
1. Remove the battery compartment cover by
pushing in and down toward the bottom of the
trimmer.
2. Align the two AA batteries with the positive
and negative positions indicated inside the
battery compartment. Being careful not to
bend the clips, insert the negative end of
each battery first so it will slip easily into
position.
3. Return the battery cover to its original position
by pushing it in and up until you hear a small
click as it locks into place.
4. To use your trimmer, push ON/OFF switch
upwards to ON position.
5. After you finish using your trimmer, push
down on the ON/OFF switch to turn the
trimmer off.
6. Ensure the batteries are installed correctly
with regard to polarity (+ and -).
7. Remove the battery if the battery is no
longer functional or if the trimmer is left
unused for an extended period of time.
8. Clean the battery contacts and also those
of the device prior to battery installation.
9. Remove used batteries promptly.
10. Use only alkaline batteries.
* Do not use in the shower or submerse
unit in water.
11.Always purchase the correct size and
On/Off Switch
grade of battery most suitable for the
intended use.
12.Replace all batteries of a set at the same
time.
13.Do not mix old and new batteries. Do not
mix alkaline, standard (Carbon-Zinc), or
rechargeable (Nickel cadmium or Nickel
Metal Hydride) batteries.
user mainTenance
insTrucTions
Taking care of your Trimmer
oiling The blades
About once a month you should oil the trimmer
blades with the oil provided in your kit. It is best
to do this over a piece of newspaper. Turn the
trimmer on and hold it so that the blades are
pointed downward. Spread one drop of oil across
the blades, then turn the trimmer off and wipe
away the excess oil with a soft cloth.
Be careful not to use too much oil and don't oil
your trimmer more than necessary, as this could
damage the motor. (Never attempt to oil the
motor bearing, as it is permanently lubricated.)
After oiling the blades, return the trimmer and
oil packet to the trimmer storage base. KEEP OIL
OUT OF REACH OF CHILDREN.
blade care
Because the trimmer blades are precision-
made for a very special use, they should
always be handled with care. Each time you
finish using the trimmer, take the cleaning
brush provided and brush away any loose
hair that has collected in the blades.
Be especially careful when changing or
adjusting blades. When you have your trim-

Advertisement

loading