Fitting And Removal Of Base : Prolite X2472Hd - Iiyama ProLite X2472HD User Manual

FITTING AND REMOVAL OF BASE : ProLite X2472HD

 Put the monitor on a stable surface. The monitor may cause injury or damage if it falls
CAUTION
or is dropped.
 Do not give a strong impact to the monitor. It may cause damage.
 Unplug the monitor before removal or installation to avoid electric shock or damage.
<Installation>
A Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay
the monitor fl at on a table with front face down.
B Install the Stand-Base to the Monitor.
C Fix the Monitor to the Stand by screwing the push-down knob in fi rmly.
<Removal>
A Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay
the monitor fl at on a table with front face down.
B Pull the knob upwards, then unfi x the screw and remove the Stand-Base.
Stand-Base
BEFORE YOU OPERATE THE MONITOR 5
The push-down knob.