Table of Contents
Advertisement
4. Technical Specifications
Accepted power supply voltage: DC 8 V – 28 V, AC 8 V – 20 V
Current at 12 V: 670 mA (8 Watts)
Dimensions: 215 x 44 x 130 mm
Weight: 1 kg
4.1 Analog Specs
AD
Resolution AD: 24 bit
Signal to Noise ratio: 110 dB RMS unweighted, 113 dBA
Frequency response AD @ 44.1 kHz, -0.1 dB: 5 Hz - 21.5 kHz
Frequency response AD @ 96 kHz, -0.5 dB: 5 Hz – 45.3 kHz
Frequency response AD @ 192 kHz, -1 dB: 5 Hz - 74 kHz
THD: < -110 dB, < 0.00032 %
THD+N: < -104 dB, < 0.00063 %
Crosstalk: > 110 dB
Maximum input level AD: +19 dBu
Input: XLR or 1/4" TRS, electronically balanced
Input impedance: 10 kOhm
Input sensitivity switchable: +4 dBu, -10 dBV, Lo Gain
Input level for 0 dBFS @ Lo Gain: +19 dBu
Input level for 0 dBFS @ +4 dBu: +13 dBu
Input level for 0 dBFS @ -10 dBV: +2 dBV
DA
Resolution DA: 24 Bit
Signal to Noise ratio (SNR): 116 dB RMS unweighted, 119 dBA @ 44.1 kHz (unmuted)
Frequency response @ 44.1 kHz, -0.1 dB: 1 Hz – 21.1 kHz
Frequency response @ 96 kHz, -0.5 dB: 1 Hz – 43.5 kHz
Frequency response @ 192 kHz, -1 dB: 1 Hz – 70 kHz
THD: -103 dB, < 0.0007 %
THD+N: -100 dB, < 0.0001 %
Crosstalk: > 110 dB
Maximum output level DA: +19 dBu
Output: XLR and 1/4" TRS, servo balanced
Output impedance: 75 Ohm
Output level switchable: Hi Gain, +4 dBu, -10 dBV
Output level at 0 dBFS @ Hi Gain: +19 dBu
Output level at 0 dBFS @ +4 dBu: +13 dBu
Output level at 0 dBFS @ -10 dBV: +2 dBV
DA - Stereo Monitor Output (Phones)
as DA, except:
Output: 6.3 mm stereo TRS, unbalanced
Output impedance: 30 Ohm
4
User's Guide ADI-2 © RME
Advertisement
Table of Contents
