Technical Specifications; Analog Specs; Digital Specs - RME Audio ADI-8 DS User Manual

4. Technical Specifications

• Power supply: Internal, 100-240 V AC, 30 Watts
• Typical power consumption: 12 Watts
• Dimensions including rack ears (WxHxD): 483 x 44 x 242 mm (19" x 1.73" x 9.5")
• Dimensions without rack ears/handles (WxHxD): 436 x 44 x 235 mm (17.2" x 1.73" x 9.3")
• Weight: 2 kg ( 4.4 lbs)
• Temperature range: +5° up to +50° Celsius (41° F up to 122°F)
• Relative humidity: < 75%, non condensing

4.1 Analog Specs

AD
• Resolution AD: 24 bit
• Signal to Noise ratio: 113 dB RMS unweighted, 117 dBA
• THD: < -110 dB, < 0.00032 %
• THD+N: < -104 dB, < 0.00063 %
• Crosstalk: > 130 dB
• Maximum input level AD: +19 dBu
• Frequency response AD, -0.1 dB: 5 Hz – 21.5 kHz
• Input Line: 1/4" TRS and 25 pin D-sub, servo balanced
• Input impedance Line: 10 kOhm
• Input sensitivity switchable: +4 dBu, -10 dBV, Lo Gain
• Input level for 0 dBFS @ Lo Gain: +19 dBu
• Input level for 0 dBFS @ +4 dBu: +13 dBu
• Input level for 0 dBFS @ -10 dBV: +2 dBV
DA
• Resolution DA: 24 Bit
• Dynamic Range: 112 dBA (unmuted)
• THD: < -104 dB, < 0.00063 %
• THD+N: < -102 dB, < 0.0008 %
• Crosstalk: > 110 dB
• Maximum output level DA: +19 dBu
• Frequency response DA, -0.1 dB: 5 Hz - 21,6 kHz
• Output Line: 1/4" TRS and 25 pin D-sub, servo balanced
• Output impedance Line: 47 Ohm
• Output level switchable: Hi Gain, +4 dBu, -10 dBV
• Output level at 0 dBFS @ Hi Gain: +19 dBu
• Output level at 0 dBFS @ +4 dBu: +13 dBu
• Output level at 0 dBFS @ -10 dBV: +2 dBV

4.2 Digital Specs

• Super Low Jitter Design: < 4 ns word clock PLL, < 1 ns ADAT PLL, < 1 ns internal
• Internal sample rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
• Word clock In range: 27 kHz - 57 kHz
• Internal resolution: 24 bit
• Outputs: ADAT optical (24 bit), TDIF-1 (24 bit), word clock
• Inputs: ADAT optical (24 bit), TDIF-1 (24 bit), word clock
• ADAT In clock range: 33 kHz - 57 kHz
• Bit Split: 24 bit to 1 channel 16 bit and 1 channel 8 bit
• Sample Split: 96 kHz to 2 channels of 48 kHz
• Copy Mode: Direct 24 bit copying from ADAT to ADAT/TDIF and vice versa
• Dither: 1 LSB TPDF switchable
User's Guide ADI-8 DS © RME
5