[Cam] Tab - Panasonic WJ-ND300 Setup Instructions

[A-B Repeat] box
The A-B repeat playback will be performed.
[Start Time]:
Starts repeated playback of images between the A-B
repeat start/end points.
Date and time of the A-B start/end points will be dis-
played in the playback position operations area.
[Cancel]:
The A-B repeat playback will be canceled.
[Registration] box
Downloads the image currently playing to a PC.
[Download]:
Displays the download setting window for download-
ing images.
Date and time of the download start/end points will
be displayed in the playback position operations
area.

[CAM] Tab

[Zoom] box
Zooming can be adjusted by clicking the
[Wide] button or the
[Focus] box
Focusing can be adjusted by clicking the
button or the [Far] button.
The auto focus function can be performed by clicking
the [Auto] button.
[Auto] box
The auto function of the camera will start by clicking the
[ON] button. The auto function can be stopped
by clicking the [OFF] button.
Control pad/buttons
Clicking the buttons around the control pad can move
(pan/tilt) a camera in the clicked direction. Clicking
Control pad/buttons
[Tele] button.
[Near]
[VIewer]:
Clicking this button will start downloading the viewer
software that can play downloaded images.
[Text] button
The attached text information will be displayed when
this button is clicked during pausing.
[Recording] box
The recording button and the recording stop button will
be displayed when the button is clicked.
Displaying the recording button and the recording stop
button will be unavailable when the
[Recording] button: Starts manual recording.
[Stop recording] button: Stops manual record-
ing.
Important:
• To display the [Recording] button and the [Stop
recording] button, hold down the
are displayed.
inside the control pad also can adjust the vertical/hori-
zontal position (pan/tilt) of the displayed image.
Panning/tilting speed will be faster if a clicked point gets
farther from the center point of the control pad.
[Iris] box
The iris can be adjusted by clicking the
button or the [Open] button. It is possible to
reset the set iris by clicking the
[PRESET] box
Moves a camera to the preset position registered in
advance. Click the
preset number by clicking the
Registering preset positions is required to perform the
preset function. (Refer to the operating instructions of
the camera in use for descriptions of how to register the
preset positions.)
button is clicked.
button until they
[Close]
[Reset] button.
[SET] button after selecting a
button.
25