Panasonic WJ-ND300 Setup Instructions page 37

Setup menu
Comm
Basic Setup
DNS Setup
DDNS Setup
Proxy Setup
SNMP Setup
NTP Setup
FTP Setup
Mail Setup
Panasonic Alarm protocol
User Mng.
Basic Setup
Administrator Edit
User Regist.
User Edit/Delete
Host Regist.
Host Edit/Delete
User Level
Description
Settings for a network can be performed. Settings for a network
connection such as settings of the IP address and gateway
address can be performed.
Basic network DNS settings can be performed with this menu.
Settings relating to the DNS settings such as the domain name
can be performed.
Basic network DDNS settings can be performed with this menu.
Determine to enable or disable DDNS, or perform the settings of
the registered user IDs.
Basic network proxy settings can be performed with this menu.
Determine whether or not to use the proxy server, and perform
the settings such as the server address settings, etc.
Perform the settings for the SNMP. Perform the settings for the
status check of the unit, etc. by connecting the SNMP manager.
Set this item when adjustment of the time is required to be set
with the NTP server such as when setting the NTP server
address.
Perform the settings for the FTP server. Settings for transmitting
images from a camera connected to this unit to a designated
FTP server periodically can be performed with the FTP Setup
menu.
Set this item to send e-mails to addresses registered in advance
at an event or error occurrence.
It is possible to send a mail to addresses registered in advance
using Panasonic original transmission method when an event or
a problem occurs. To receive messages using this function, the
optional software (WV-AS65) is necessary.
Configure whether to enable or disable the user authentication
and the host authentication.
Edit information of the registered administrators such as the
password, the default screen, etc.
Set this item for user registration and user authentication. User
name, password and operational level can be set.
Correction or deletion of user information can be performed.
Set this item for the host authentication by registering PCs
(hosts) allowed to access this unit via a network. Operational lev-
els and IP addresses of PCs can be set.
Correction or deletion of host information can be performed.
Functions operable in each user level can be set.
Page
62
64
65
66
67
68
69
71
72
73
74
75
76
76
77
78
37