Messaging - Cancel Callback - Mitel Navigator User Manual

3. Press the Yes softkey.
4. Do one or all of the following (if required):
• To display the time the message was sent, press the More softkey.
• To display the number of the caller, press the More softkey twice.
5. Do one of the following:
• To call the message sender, press the Call softkey.
• To delete the message, press the Erase softkey.
• To view the next message, press
To check for messages from a remote station:
1. Press (SUPERKEY).
2. Press the No softkey until "Remote Msging?" appears.
3. Press the Yes softkey.
4. Dial your extension number.
5. Press the Enter softkey.
6. If a password is required, enter your password and press the Enter softkey.
7. Press the Yes softkey.
To set, change, or clear a password (up to 7 digits, not including 0):
1. Press (SUPERKEY).
2. Press the No softkey until "Set Password?" appears.
3. Press the Yes softkey.
4. Do one of the following:
• To enter a new password, enter your password.
• To change or clear your password, enter your current password.
5. Press the Enter softkey.
6. If you are changing or clearing your password, do one of the following:
• To change your password, enter your new password and press the Enter softkey.
• To clear your password, enter 0.
7. Enter your new password again.
8. If you are setting up or changing a password, press the Enter softkey.
9. Press (SUPERKEY).
Messaging – Cancel Callback
To cancel a Callback:
1. Lift the handset.
2. Dial *1#.
(MESSAGE).
45
Call Handling