Intermec PC23 User Manual page 53

PC23 and PC43 Desktop Printer User Manual
For a PC43t, thread the media through the media guides and past
the front of the printer. To adjust the width of the media guides,
slide the guides as needed to fit your media.
6 Close the printer lid until it snaps shut.
7 Turn the printer on and adjust the media feed as required. Intermec
recommends the following values for straight-through or tear-off
printing:
Recommended Feed Adjust Values for PC23d
Setting 203 dpi
Start Adjust -113
Stop Adjust 0
Recommended Feed Adjust Values for PC43d
Setting 203 dpi
Start Adjust -124
Stop Adjust 0
Chapter 2 — Set Up the Printer
300 dpi Distance
-168 -14.24 mm (-0.56 in)
0 0 mm (0 in)
300 dpi Distance
-183 -15.50 mm (-0.61 in)
0 0 mm (0 in)
39