Intermec PC23 User Manual page 171

Setting
CA Certificate
Client Certificate
Client Key
Server Common Name 1 Sets the certificate name that is on the primary
Server Common Name 2 Sets the certificate name that is on the
Validate Certificate
PAC
Acquire PAC
Fast Roaming (CCKM) Determines if the printer can roam from one
Mixed Mode
(Group=TKIP)
PC23 and PC43 Desktop Printer User Manual
Description
Sets the name of the Certificate Authority (CA)
that verifies the server certificate. This CA
should be the same one that was used to sign
the server certificate.
Sets the name of the client certificate the
printer uses to authenticate to the network
using EAP-TLS. Maximum length is 128
characters.
Sets the private key the printer uses for
EAP-TLS. Maximum length is 128 characters.
Use the certinstall.sh script to install the
certificate correctly.
authentication server. If this value is none, then
the value for Server Common Name 2 is used.
Range is 1 to 96 characters.
secondary authentication server. If this value is
none, then the value for Server Common Name
1 is used. Range is 1 to 96 characters.
Determines if the identity of the authentication
server is verified using its certificate when using
EAP-TTLS, PEAP, or EAP-TLS. Intermec
recommends that you set Validate Certificate to
Yes.
Sets the name of the Protected Access
Credential (PAC) that is used for EAP-FAST
authentication. The printer uses this file if
Acquire PAC is on and the current installed
PAC fails to authenticate the printer to the
network.
Determines if automatic PAC file provisioning
is on for EAP-FAST authentication.
access point to another without
reauthenticating with the server. CCKM only
works in wireless networks using LEAP.
Determines if the printer can use either TKIP or
AES for data encryption, depending on the
configuration of the access point.
Appendix A — Specifications and Default Settings
Default
intermec.pem
None
None
None
None
No
eap-fast.pac
On
Disable
Disable
157