Sharp AL-1651CS Service Manual page 49

19) Remove each pawl, and remove the paper exit tray.
1)
4)
20) Remove two screws and remove the fusing connector.
21) Remove five screws and the connector, and lift the intermediate
frame unit to remove.
3)
3)
1)
3)
2)
3)
3)
4)
2)
2)
AL-1651CS DISASSEMBLY AND ASSEMBLY 8 - 10
22) Remove the four screws, and remove the lower paper guide unit.
[Note for installation]
Fit the lower paper guide hole (a) with the shifter gear hole (b) so
that the black resin (c) of the shifter unit can be checked.
1)
23) Disengage the pawl, and remove the pulley.
24) Shift and remove the shifter unit.
2)
3)
1)
25) Remove the screw, and remove the grounding plate and the gear.
26) Remove the E-ring, the gear, and the bearing, and remove the
shifter roller.
b
c
a
1)
1)
1)
2)
3)
4)
1)
2)
3)