User Mode - SATO 9001226(A) Service Manual

Section 4: Operation and Configuration

4.6 USER MODE

The following settings are available in the User Mode.
Displayed only when entry
of PASSWORD is enabled
During Offline mode, press FUNCTION button to display the operational icon menu. Press arrow buttons
1.
to select USER MODE.
When USER MODE screen is displayed, press the FEED button to enter User mode for adjustment.
2.
Note:
PASSWORD may prompt on the display if SET PASSWORD is set to ON in the Service mode. Please
refer to Section 4.15 Service Mode for details on how to enter password.
PRINT SPEED is first displayed. Press the FEED button repeatedly will switch to the next setting options
3.
as shown above. To return to the previous setting option, press ONLINE button.
When the desired setting option is displayed, press arrow buttons to select the item or to set the value and
4.
then press FEED button to save the setting.
You may wish to print a test print after completing the adjustments to ensure they are correct. Refer to
Section 4.12 Test Print Mode for details.
Page 4-12
FEED
ONLINE
button
button
FUNCTION
button
FEED button
FUNCTION
button
FEED
ONLINE
button
button
FUNCTION
button
FEED
ONLINE
button
button
FUNCTION
button
FEED
ONLINE
button
button
FUNCTION
button
FEED
ONLINE
button
button
FUNCTION
button
FEED button
Return to USER MODE menu
* Press , , or button to select
item or set the value accordingly.
The active arrow icons are displayed
on the screen.
TG3 Series Service Manual