Ke-432B, 432C; Be-438B, 438C - Brother KE-430B Service Manual

4. ASSEMBLY
When assembling, apply grease to the required places while referring to "4-5-1. Applying grease".

KE-432B, 432C

BE-438B, 438C

1. Work clamp lifter link-related parts
[Insert from above the arm]
2. Link shaft, B
[Place into the forked section of the thread wiper driving lever (2)]
3. Link shaft, A [Pass through the washer and link A (3)]
4. Snap pins [2 pcs: Attach to both ends of link shaft A]
5. Set screws [2 pcs]
6. Retaining ring
7. Plain washer
8. Rubber band
9. Work clamp lifting rod
10. Link shaft, C [Pass through link B (10) and the work clamp plate]
11. Snap pins [2 pcs: Attach to both ends of link shaft C]
12. Presser solenoid assy [Insert from above the arm]
13. Screws [2 pcs]
14. Screws [4 pcs]
15. Rubber caps [2 pcs]
67
<BE-438B, 438C>
KE-430B, 430C series
Secure link shaft A using the set
screw so that link B (10) is centered
in the bush.
3354Q