Optional Parts - Brother KE-430B Service Manual

７. OPTIONAL PARTS
Two-pedal foot switch
The presser switch and the start switch have been
separated, giving the operator more flexibility to select
the best method of working.
* Standard equipment for pneumatic specification
Solenoid thread wiper
This wipes the thread independently of the work
clamp operation.
* Standard equipment for the KE-434* pneumatic
specification
Liquid cooling tank
This helps to prevent thread breakage caused by
friction when using synthetic threads.
Fill the tank with silicone oil (100mm
Emergency stop switch
If the emergency stop switch has been pressed during
sewing, the machine can be stop. And, you can move
the feed mechanism back in steps to the desired
position and then start sewing again.
Two-step foot switch
0271Q
This is a pedal-type foot switch.
Work clamp set QC (KE-430*)
0275Q
The work clamp can be easily replaced by loosening
the bolt and moving work clamp arm levers.
Three-pedal foot switch (for pneumatic)
0273Q
The switch has an independent left work clamp switch
(left side), right work clamp switch (center) and start
2
/s). switch (right side).
Work clamp plate, OT (KE-435*, 436*)
0276Q
Provide an even clamping pressure. Replacement of
work clamp blanks and positioning of parts can be
carried out easily. In addition, the work clamp is made
from plastic so that pattern shape processing is also
easy.
KE-430B, 430C series

7. OPTIONAL PARTS

0272Q
0274Q
3222Q
3577Q
136