Brother KE-430B Service Manual page 134

5. ADJUSTMENT
[A]
3490Q
5. Turn the pulley by hand and check at what point the needle drops to the home position standard plate. If the
needle does not drop to point (a), carry out the following adjustments.
Note:
Be careful not to let the needle touch the home position standard plate.
3492Q
[A]
X direction
6. Turn off the power switch.
7. Loosen the screws (8), and then adjust by turning the home position dog (9). (Refer to the next page.)
8. After adjusting, turn on the power switch and repeat the check in step 5.
127
Y direction
[B], [C]
(Seen from the side)
KE-430B, 430C series
[B], [C]
X direction
3491Q
Y direction
3493Q