Driving Position Memory System - Acura TL 2007 Owner's Manual

Driving Position Memory System

Your vehicle has a memory feature
for the driver's seat and outside
mirror positions.
Two seat and outside mirror
positions can be stored in separate
memories. You select a memorized
position by pushing the appropriate
button or using the appropriate
remote transmitter (Driver 1 or
Driver 2).
108
Storing a Driving Position in
Memory
Store a driving position only when
the vehicle is parked.
1. Turn the ignition switch to the ON
(II) position. You cannot add a
new driving position to the
memory unless the ignition switch
is in the ON (II) position. You can
recall a memorized position with
the ignition switch in any position.
2. Adjust the seat to a comfortable
position (see page 103 ).
Adjust the outside mirrors for best
visibility (see page 107 ).
MEMO BUTTON
MEMORY BUTTONS
3. Press and release the MEMO
button on the driver's door. You
will hear a beep. Immediately
press and hold one of the memory
buttons (1 or 2) until you hear two
beeps. The indicator in the
memory button will come on. The
current positions of the driver's
seat and outside mirrors are now
stored.