Acura TL 2007 Owner's Manual page 108

Remote Transmitter
Keyless Memory Settings TM
When you unlock the driver's door
with a remote, that remote's keyless
memory settings are activated.
Depending on which remote was
used, a WELCOME DRIVER 1 or
WELCOME DRIVER 2 message
appears on the multi-information
display. The driver's ID (MEMORY
1 or MEMORY 2) is printed on the
back of each remote.
102
Here are the settings activated by
the remote;
Customized settings
(see page 77 ).
Driving position memory
(see page 108 ).
When you unlock and open the
driver's door with the remote, the
driver's seat (except power lumbar)
and outside mirrors move to the
positions stored in memory. An
indicator on one of the driving
position memory buttons also comes
on.
To turn off this feature, press and
hold the LOCK and UNLOCK
buttons at the same time. The LED
in the remote will blink twice. Then
release the buttons. Doing this
cancels the keyless memory settings
for that remote and restores the
default settings.
To turn the keyless memory settings
back on, repeat this procedure. The
LED will blink once to indicate the
feature has been turned on.