Acura TL 2007 Owner's Manual page 301

2. Use a flat-tipped screwdriver to
remove the holding clips from the
edge of the inner fender cover,
and pull the inner fender cover
back.
3. Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
4. Remove the bulb from the socket
by pushing it in and turning it
counterclockwise until it unlocks.
5. Install the new bulb in the socket.
Turn it clockwise to lock it in place.
6. Insert the socket into the
headlight assembly. Turn it
clockwise to lock it in place.
7. Test the lights to make sure the
new bulb is working.
8. Push the inner fender cover in
place. Install the holding clips, and
lock them in place by pushing on
their center.
Lights
Replacing a Front Fog Light Bulb
1. Start the engine. If you are
replacing a driver's side bulb, turn
the steering wheel all the way to
the right. If you are replacing a
passenger's side bulb, turn the
steering wheel to the left. Turn off
the engine.
CONTINUED
295