Acura TL 2007 Owner's Manual page 167

SCAN The scan function gives
you a sampling of all channels while
in the channel mode. In the category
mode, only the stations within that
category are scanned. To activate
scan, press the SCAN button or
touch the SCAN icon on the audio
display. The system plays each
channel in numerical order for 10
seconds. When you hear a channel
you want to continue listening to,
press the SCAN button or touch the
icon again.
Audio System (Models with Navigation System)
Preset You can store up to 12
preset channels using the six preset
buttons or preset icons. Each button
stores one channel from the XM1
band and one channel from the XM2
band.
To store a channel:
1. Press the XM button. Either XM1
or XM2 will show in the display.
2. Use the TUNE knob, or the
CATEGORY or SCAN buttons to
tune to a desired channel.
In category mode, only channels
within that category can be selected.
In channel mode, all channels can be
selected.
3. Pick the preset button (icon) you
want for that channel. Press and
hold the button (icon) until you
hear a beep.
4. Repeat steps 2 and 3 to store the
first six channels.
5. Press the XM button again. The
other XM band will show. Store
the next six channels using steps 2
and 3.
Once a channel is stored, simply
press and release the proper preset
button (icon) to tune to it.
161