Setting The Network [Network] - Denon CEOL RCD-N8 Owner's Manual

Setting the network [Network]

• For details on "Quick Setup" operations, see the separate
"Quick setup guide".
• If you cancelled "Quick Setup" menu or changed the network
environment, perform "Setup" – "Network" – "Quick Setup".
Connecting wired LAN
Use this procedure to configure the wired LAN settings.
n Network connecting
(when "DHCP"settings are "On")
When using this unit with the broadband router's DHCP function
enabled, this unit automatically performs the IP address setting
and other settings.
1
Connect the ETHERNET cable
(vpage 9 "Connecting to a
home network (LAN)" – "Wired
LAN").
2
Press POWER X to turn on
power to the main unit.
3
SETUP
Press .
Turns on the Menu settings mode
and the Menu appears on the display
(vpage 11 "Menu map").
4
Use ui and ENTER to select
"Network" – "Settings" –
"DHCP (On)", then press
ENTER or p .
"Select DHCP" menu appears.
5
Use ui to select "On", then press
"DHCP (On)" menu appears.
6
Use ui to select "Test Connection", then press
ENTER p
or
"Wait for the network to connect..." is displayed, and the unit
starts connecting to the LAN.
• When the connection is made successfully, "Connected!" appears.
• If the connection cannot be established, "Connection Failed" is
displayed. Perform steps 1 – 6 again.
You may need to set the network connection manually, depending
on the provider you use. To set the connection manually, use the
setting procedure of "Network connecting (when "DHCP" settings
are "Off")".
SLEEP CLOCK DIMMER POWER
INTERNET ONLINE MUSIC
RADIO MUSIC SERVER
TUNER ANALOG IN DIGITAL IN
iPod USB CD
CH - +
CH
TUNE - TUNE +
MUTE
ADD
FAVORITE VOLUME
SDB
CALL
TONE
TOP MENU INFO
ENTER
SEARCH SETUP
1 2 3
. / ABC DEF
ENTER or p .
4 5 6
MNO
GHI JKL
7 8 9
PQRS TUV WXYZ
+10 0
CLEAR
a/A *
RANDOM REPEAT PROGRAM MODE
RC-1174
.
17
n Network connecting
(when "DHCP" settings is "Off")
This section explains the settings when connecting this unit to a
network that does not have a DHCP function.
To configure the settings manually, check the setting details with
your network administrator.
1
Perform steps 1 – 4 of the
"Network connecting (when
"DHCP" settings are "On")"
procedure and select "Off" in
step 5.
"DHCP (Off)" menu appears.
2
ui
Use to select "IP Address",
then press ENTER or p .
"Enter IP Address" menu appears.
3
uip 0 – 9
Use or to input the
IP address and press ENTER .
4
Use uip or 0 – 9 to input the address for
"Subnet Mask", "Gateway", "Primary DNS", and
"Secondary DNS".
5
Use ui to select "Test Connection", then press
ENTER p
or .
"Wait for the network to connect..." is displayed, and the unit
starts connecting to the LAN.
• When the connection is made successfully, "Connected!" appears.
• If the connection cannot be established, "Connection Failed" is
displayed. Perform steps 1 – 4 again.
SLEEP SLEEP CLOCK CLOCK DIMMER DIMMER POWER POWER
INTERNET INTERNET ONLINE ONLINE MUSIC MUSIC
RADIO RADIO MUSIC MUSIC SERVER SERVER
TUNER TUNER ANALOG IN ANALOG IN DIGITAL IN DIGITAL IN
iPod iPod USB USB CD CD
CH - CH - CH CH + +
TUNER - TUNE - TUNER + TUNE +
MUTE MUTE
ADD ADD
FAVORITE FAVORITE VOLUME VOLUME
SDB SDB
CALL CALL
TONE TONE
TOP MENU TOP MENU INFO INFO
ENTER ENTER
SEARCH SEARCH SETUP SETUP
1 1 2 2 3 3
. / . / ABC ABC DEF DEF
4 4 5 5 6 6
GHI GHI JKL JKL MNO MNO
7 7 8 8 9 9
PQRS PQRS TUV TUV WXYZ WXYZ
+10 +10 0 0
CLEAR CLEAR
a/A a/A * *
RANDOM REPEAT PROGRAM RANDOM REPEAT PROGRAM MODE MODE
RC-1174 RC-1174