Ring Tone Pattern Selection - Panasonic KX-TDA100 Features Manual

Indication Type
LED
Display (Caller
Information)
External Pager
Tone/Voice
during a
Conversation
1.1.3.2

Ring Tone Pattern Selection

Description
A different ring tone pattern can be assigned to each incoming call type, based on the Ring Tone Pattern
Table of the extension.
There are several programmable Ring Tone Pattern Tables. Each table designates a ring tone for intercom
calls, CO line calls, doorphone calls, etc., and each extension can choose its preferred ring tone pattern by
selecting a table.
[Ring Tone Patterns]
1 280 ms
Single
Double
Triple
S-Double
[Programming Example: Ring Tone Pattern Table]
Intercom
Table
Call/Hold
No.
Recall
1 Double
2 Single
Feature
LED Indication The LED indicator on a PT can indicate the
status of different lines using light patterns and
colors.
Display A user's PT can show a variety of information
Information on the display, such as the line number, the
caller's name and number, the original
destination if the call was forwarded, etc.
Trunk Answer A pager (loudspeaker) can be used to indicate
from Any Station when a call is received, useful in noisy or large
(TAFAS) workplaces.
Call Waiting When an extension user is on another call, the
user can be alerted to a new call by a call
waiting tone, or the caller can speak directly
through the user's handset or built-in speaker.
CO Line Call/Hold
Doorphone Call
Recall
TRG1 TRG... Port 1
Single Single
Double Double
Description
Timed Call
Reminder Back
Port ...
1.1 Incoming Call Features
Details in
• 1.18.3 LED
Indication
• 1.18.4 Display
Information
• 1.15.3 Trunk
Answer From Any
Station (TAFAS)
• 1.1.3.3 Call
Waiting
LCS External
Sensor
Feature Guide 31