4.9.3
Extension Group [3-2]
Extensions can be assigned to a tenant according to their extension group. An extension group can belong
to only one tenant. However, one extension group can belong to several call pickup groups and several
paging groups. A maximum of 8 tenants can be programmed.
Extension Group Name
Specifies the name of the extension group. As for the available characters, refer to the character code table
described in section 3.2.1 Installing and Starting KX-TDA Maintenance Console.
Default
Not stored.
Value Range
Max. 20 characters
Programming Guide References
4.9.4 Call Pickup Group [3-3]
4.9.5 Paging Group [3-4]
4.10.1 Wired Extension—Extension Settings [4-1-1]—Main—Extension Group
4.10.9 Portable Station—Extension Settings [4-2-1]—Main—Extension Group
Feature Guide References
2.2.2 Group
Tenant Number
Specifies the tenant to which the extension group belongs.
Default
1
Value Range
1–8
Programming Guide References
4.10.1 Wired Extension—Extension Settings [4-1-1]
4.10.9 Portable Station—Extension Settings [4-2-1]
Feature Guide References
2.2.2 Group
2.2.3 Tenant Service
4.9 Groups [3]
Feature Guide
547