Making Call Features; Predialing; Automatic Extension Release - Panasonic KX-TDA100 Features Manual

1.5

Making Call Features

1.5.1

Predialing

Description
A display proprietary telephone (PT) user can check and correct the number to be dialed on-hook. The call
will be initiated after going off-hook.
Conditions
• Storing the Predialed Number in Personal Speed Dialing
The predialed number can be stored in Personal Speed Dialing by pressing the AUTO DIAL/STORE
button. (→ 1.6.1.4 Speed Dialing—Personal/System) In this case, the extension will enter personal
programming mode automatically so that a name can be assigned to the stored number.
Operation References
3.1.2 Settings on the Programming Mode
1.5.2

Automatic Extension Release

Description
After going off-hook, if an extension user fails to dial any digits within a preprogrammed time period, the user
will hear a reorder tone. This operation applies to intercom calls only.
This feature is also known as Automatic Station Release.
Conditions
• A proprietary telephone (PT)/portable station (PS) user hears a reorder tone for a preprogrammed time
period, and then the PT/PS returns to idle status automatically. A single line telephone (SLT) user will
hear a reorder tone until he or she goes on-hook.
• This feature works in one of the following cases:
When making an intercom call
a)
The first digit is not dialed within a preprogrammed time period.
b)
A digit is dialed, but subsequent digits are not dialed within a preprogrammed time period.
1.5 Making Call Features
Feature Guide 63