Mechanical Disassemblies - Sanyo PLV-Z2 Service Manual

■ Mechanical Disassemblies

[Attention]
This LCD projector is used the different kind of screw. The using correct screw is needed to prevent
the damage.
1.
CABINET - TOP REMOVAL
1. Remove 6 screws to take the Cabinet Top upward off.
Note
: For fixing the Cabinet Top, its
rib should be located in front of
the spacer lens.
Rib
2.
CABINET - FRONT REMOVAL
1. Open the door.
2. Remove a screw to take the Cabinet Front off.
3.
MAIN BOARD AND THERMAL BARRIER PLATE REMOVAL
A
1. Remove 7 screws to take the Main Board upward off.
B
2. Remove 2 screws to take the thermal barrier plate
upward off.
Spacer
Lens
-12-
Main Board
A
A
A
A
A
A
A
Cabinet Top
Fig. 1
Cabinet Front
Door
Fig. 2
Thermal
Barrier
B
Plate
B
Fig. 3