Brother ADS-2000 User Manual page 93

Scanning Difficulties
Bleed through is seen
in the scan data.
Colors in the scanned
data are dark.
A page that is not a
blank page is skipped.
file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter7_5.html[3/11/2013 10:23:51 AM]
The settings are not appropriate for the
type of document being scanned.
The settings are not appropriate for the
type of document being scanned.
• The document is too light.
• Blank Page Skip is set to On.
Check the Bleed Through Prevention/Base Color
Removal check box.
Do one of the following:
• Check the Bleed Through Prevention/Base Color
Removal check box and then scan from your
computer.
• Change Brightness higher and then scan from
your computer.
• Change Contrast higher and then scan from your
computer.
• Change Scan Type to Gray or Color and then
scan from your computer.
Set Blank Page Skip to Off.
Page Top