Brother ADS-2000 User Manual page 229

Change Scan Settings
Plastic Card
Mode
4
Click the Advanced Settings button. The Advanced Settings dialog box will appear.
file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_5_26.html[3/11/2013 10:24:37 AM]
Fold the document in half and insert it in the Carrier
Sheet for 2-sided (duplex) scanning, then both front
and back pages will be combined into a single page.
• Important documents (photos, contracts)
• Thin paper (receipts)
• Irregular-shaped paper (clippings)
Note
• Load only one Carrier Sheet at a time.
• Set the document in the center of the Carrier
Sheet and align the top of the document with the
top of the Carrier Sheet.
Lets you scan non-embossed cards, such as driver's
licenses or insurance cards, using these automatic
settings:
• Resolution: 600 x 600 dpi
• Document Size: 2 in 1 (Business Card)
• Duplex(two-sided) Scanning: On (Short-edge
binding)
• Auto Deskew: Off
• Multifeed Detection: Off
• Automatic Image Rotation: Off
Note
• If you want to scan a plastic card with different
settings, set Plastic Card Mode off, Resolution
to 600 dpi, and Multifeed Detection to Off.
• Load only one plastic card at a time.
Yes Yes Yes Yes