Brother ADS-2000 User Manual page 222

Change Scan Settings
Default
5
Click the Advanced Settings button. The Advanced Settings dialog box will appear.
6
Change the settings.
The following settings can be changed.
Setting
Auto Deskew
Automatic Image
Rotation
Bleed Through
Prevention/Base
Color Removal
Blank Page Skip Removes blank pages of the document from the
Multifeed
Detection
Display
file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_3_27.html[3/11/2013 10:24:35 AM]
• Multifeed Detection: Off
• Automatic Image Rotation: Off
Note
• If you want to scan a plastic card with different
settings, set Plastic Card Mode off, Resolution
to 600 dpi, and Multifeed Detection to Off.
• Load only one plastic card at a time.
Restore all settings to their factory default values.
Description
Corrects the skew (within 5 degrees) of the scanned
data.
Changes the direction of the document based on the
text orientation.
Prevents the Bleed Through phenomenon on a two-
sided document, and also allows you to remove the
base color of documents such as newspapers to make
the scanned data more recognizable.
scanning results.
Uses a ultrasonic sensor to detect when a multifeed
has occurred. When this function detects a multifeed,
confirm that the data scanned before the multifeed has
been saved, and then start scanning again at the next
page or the beginning of the document.
Shows the numbers of total pages saved and blank
Yes Yes Yes
Applicable Feature
Image OCR E-mail
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes
File
Yes
Yes
Yes
Yes
Yes
Yes