Brother ADS-2000 User Manual page 91

Scanning Difficulties
The scan speed is too
slow.
The document was not
fed.
A multifeed occurs.
file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter7_5.html[3/11/2013 10:23:51 AM]
The resolution is not suitable for your
document.
• Paper dust has accumulated on the
surface of the Pick-up Roller or
Separation Pad.
• Too many documents are loaded in
the document feeder at a time.
• There are foreign objects in the
document feeder.
• Your document is too thin or too
thick.
• Remote Setup is in process.
• Paper ejection has paused.
• Paper dust has accumulated on the
surface of the Pick-up Roller or
Separation Pad.
• Too many documents are loaded in
the document feeder at a time.
• See Change Scan to PC Settings
using the Scan to PC key (Windows
follow the steps.
• See Change Scan Settings
Scan to PC key (Macintosh) and follow the
steps.
• See Change Scan Settings
Scan to USB key and follow the steps.
Decrease the scanner resolution by doing one of
the following:
• See Custom Scan Settings
ControlCenter4 Home Mode (Windows
follow the steps.
• See Change Scan Settings
ControlCenter4 Advanced Mode (Windows
and follow the steps.
• See Change Scan Settings
ControlCenter2 (Macintosh) and follow the steps.
• See Change Scan to PC Settings
the Scan to PC key (Windows
steps.
• See Change Scan Settings
Scan to PC key (Macintosh) and follow the
steps.
• See Change Scan Settings
Scan to USB key and follow the steps.
• Clean the Separation Pad and Pick-up Roller.
See Clean the Scanner.
• Make sure your document is acceptable for the
machine. See Acceptable
• Remove any foreign objects or ripped paper from
the document feeder.
• Make sure your document is acceptable for the
machine. See Acceptable
• Cancel Remote Setup. See Remote Setup in
LED Indications.
• Finish ejecting the paper. See Ejecting Paper in
LED Indications.
• Clean the Separation Pad and Pick-up Roller.
See Clean the Scanner.
• Load no more than 50 pages at a time. See
Acceptable Document.
to scan
®
) and
to scan using the
to scan using the
to scan using
®
) and
to scan using
®
)
to scan using
to scan using
®
) and follow the
to scan using the
to scan using the
Document.
Document.