Philips AVENT SCD603 User Manual page 8

There are two ways to position the baby unit:
2
1 Place the baby unit on a stable, level and
horizontal surface.
2 Mount the baby unit to the wall as shown
in the figure with the screws supplied.
Tip:
E
Use the provided template, to mark the
exact location of the screw holes on the
wall.
Tip:
E
Position the baby unit at a higher level to get a
good overview of the baby's bed or playpen.
Adjust the baby unit in a way that ensures the
3
best visibility of your baby.
Warning:
B
Do not position the baby unit with the
microphone pointing too far down, as this
may prevent the microphone from picking up
sounds properly.
8
Place the parent unit within the operating
4
range of the baby unit. Make sure it is at least
1.5 metres (5 feet) away from the baby unit
to avoid acoustic feedback.
For more information on the operating range,
see section 'Operating range' below.
4.1.1 Operating range
The operating range of the baby monitor is
150 metres (490 feet) in open air and line of sight.
indoors the operating range is up to 30 metres
(98 feet). Depending on the surroundings and
other disturbing factors, this range may be smaller.
For wet and moist materials, the range loss may
be up to 100%.
Dry materials
Wood, plaster, cardboard,
glass (without metal,
wires or lead)
Brick, plywood
Reinforced concrete
Metal grilles or bars
Metal or aluminium
sheets
Material Loss of
thickness range
< 30cm 0-10%
(12in)
< 30cm 5-35%
(12in)
< 30cm 30-100%
(12in)
< 1cm 90-100%
(0.4in)
< 1cm 100%
(0.4in)