Schwinn a25 Owner's Manual page 11

7. Install Console Mast to Main Assembly
Note: You can attach a wire (or string) to the Console Cable and HR Cable to help pull the cables through the
Console Mast.
NOTICE: Do not crimp cables.
8. Install the Console to the Console Mast
Note: Hardware is pre-installed on Console and not on Hardware Card. Remove hardware from Console before you
connect the cables.
NOTICE: Do not crimp cables. Make sure that the switch on the back of the Console is set to B (bike).
10
X3
6mm
D
B
#2
11