How To Use The Dx 900 Computer; Operation - Schwinn DX900 Features And Benefits

HOW TO USE THE DX 900
The on-board computer features multi-feedback functions
and an easy-to-read LCD display to keep track of your workout
performance and progress. By taking a few moments to fully
understand the computer operation and functions, you will get
more pleasure, motivation and value from your DX 900 Exercise
Bike workouts. It's really very easy.
With just two buttons, you can control all of the functions in
your on-board computer during your workout (Fig. 6).
On/Reset –
and resets when you want to clear the computer of recorded
data. You can also activate the computer by simply turning the
bike's pedals. If the bike is left unused, the computer will
automatically shut itself off after five minutes.
Select
four available feedback functions or scan mode. Each
individual feedback function is displayed on the LCD display
and highlighted by its particular graphic icon. Each time
you push the SELECT button the computer will switch to
a new feedback function.
6
®
COMPUTER
The ON/RESET button turns the computer on
The SELECT button lets you select any of the
–
20
8:42
TIME DIST. CALOR.
20
4.8
TIME DIST. CALOR.
20
FIG.6
36
TIME DIST. CALOR.
20
72
TIME DIST. CALOR.
Top Number Display —
FIG.7
speed in MPH.
Bottom Number Display —
following functions.
Time — The TIME feedback function is displayed
automatically when the computer is turned on. TIME
tells you exactly how long you have been working out
in minutes and seconds (Fig. 7).
P R E S S T H E
Distance — The DISTANCE feedback function keeps
RPM
track of the distance you have accumulated during your
FIG.8 workout in miles (Fig. 8).
P R E S S T H E
Calories — The CALORIES feedback function displays
your approximate calories burned (Fig. 9).
P R E S S T H E
RPM — The RPM feedback function records your
revolutions per minute (Fig. 10).
P R E S S T H E
Scan — The SCAN feedback provides you with a con-
RPM
tinuously changing display as it rolls through each of
FIG.9
the individual feedback functions. The word SCAN
appears in the lower right side of the display.
Reset — You can RESET and clear your computer of
recorded data by pushing the ON/RESET button.
F I T N E S S
S A F E G U A R D S
Dismounting the unit
WARNING! The flywheel momentum of the DX 900
Bike will keep the pedals turning even after the
RPM rider stops pedaling. DO NOT ATTEMPT TO DISMOUNT
THE BIKE OR REMOVE YOUR FEET FROM THE PEDALS
FIG.10
UNTIL THE PEDALS HAVE COMPLETELY STOPPED. Turn
resistance knob clockwise until the flywheel stops,
or pull up on the resistance knob for quicker stop-
ping. Failure to follow these instructions may lead
to loss of control and serious personal injury.
There are three ways to stop the DX 900 Bike pedals.
1. Pedal slower until you come to a complete stop.
2. Increase the resistance by turning the resistance
adjustment control clockwise until you come to a
complete stop.
3. Engage the emergency brake by pulling upward
on the resistance control knob until you come to a
RPM
complete stop.
Continuously displays your
Scans through the
S E L E C T B U T T O N
S E L E C T B U T T O N
S E L E C T B U T T O N
S E L E C T B U T T O N
7