Table of Contents
Advertisement
ON-SCREEN DISPLAY MENU FUNCTION MENU
Function Menu
Function menu allows you to select scan mode, decorative light on the front panel and multi picture mode, etc.
Please follow the steps below.
1
Press the MENU button to display the menu.
Press the
cursor buttons to select the Function
option as shown on the right.
2
Press the ENTER button to enter the Function menu.
Press the
cursor buttons to select the Scan Mode option
as shown on the right.
3
Press the ENTER button to enter the Scan Mode menu
as shown on the right.
You can press the
scan modes to improve picture effect.
1 For PAL or SECAM system you can select scan mode
from 100Hz,Virtual HD or Progressive.
2 For NTSC system, you can select scan mode from
Virtual HD or Progressive.
3 When the input signal format is 480p signal, the scan
mode setting will be fixed at Progressive.
4 When the input signal format is 576p signal, you can
select scan mode from 100Hz or Progressive. The 100Hz
mode can eliminate flicker.
5 When the input signal format is 1080i/60 or 720p/60 HD signal, the scan mode setting will be fixed at HD.
6 When the input signal format is 1080i/50 HD signal, you can select scan mode between 100Hz or HD. The
100Hz mode can eliminate flicker.
4
If the Decorative Light option on the Function menu is selected, you can turn the blue lighting on the control
panel On or Off. When the TV is in standby or the power is off, the lighting on the front panel will be off.
cursor buttons to select different
Scan Mode
20
Advertisement
Table of Contents
