Hitachi C47-WD8000 Instruction Manual page 55

Rear projection color tv
Hide thumbs Also See for C47-WD8000:
Table of Contents

Advertisement

ASPECT MODE
To switch aspect mode, please press the P.SIZE button, the TV will display the corresponding aspect mode
momentarily at the lower part of the screen. For example, set the current aspect mode to
16:9
as shown at
the lower left side. If
16:9 Zoom
is set as shown at the lower right side, you can press the
cursor
buttons to adjust the display position up and down before the words
16 : 9Zoom +3
Scroll"
disappear as shown at the lower right side. Likewise, the function is available in
4:3Zoom1 ,
4:3Zoom2
or Expanded mode.
If you change program No. or power on the TV, the aspect mode will not change.
3. When HD component signal is received
Press the P.SIZE button to switch between three different modes, 16:9 , Expanded and 16:9Zoom .
If you change program No. or power on the TV, the aspect mode will return to the mode of
16:9 .
Please see the following on each of three modes for details.
Signal Sources
HD Signal
HD Signal
HD Signal
Suggested
aspect
mode
55

Advertisement

Table of Contents
loading

This manual is also suitable for:

C57-wd8000

Table of Contents