Table of Contents
Advertisement
AV NET
4. Press the
cursor button to enter the Input item of
Custom option and then press the
select AV1.
Notes:
For DVD, AVR, CD, STB, DVD2, AVR2, CD2 and STB2, you
can choose the Input from Off, AV1, AV2, AV3, AV4 or AV5.
For VCR, CBL, VCR2 and CBL2, you can choose the Input from
Off, AV1, AV2, AV3, AV4, AV5 or TV(0P).
When using this function, the TV will switch to the AV1~AV5
mode automatically to the chosen Input item accordingly.
When using this function, the TV will switch to the program No.0
automatically if the Input item is set to TV (0P).
When using this function, the TV will remain the current state of
current if the Input item is set to Off.
5. Press the
cursor button to enter the Test/Learn item of
Custom option. The Learn item is selected and will be
displayed in green.
6.Then press the ENTER button to enter Learn state as shown
on the right. For example, you want to learn the code of
DVD player's
button. Press the
buttons to select the
displayed in green.
7.Press the RECALL button, the
yellow and the word "Learning" will appear on the lower
left of the screen. At this moment, put the remote control
unit of DVD player near and face the screen center of the TV
and press the
button on the remote control unit of DVD
player.
Notes
(1) You should press the
DVD player while the word "Learning" is displaying.
(2) Do not continue pressing the
cursor buttons to
item and the
item will be
item will be displayed in
button on the remote control unit of
button while learning.
cursor
47
Advertisement
Table of Contents
