Table of Contents
Advertisement
GETTING STARTED
Easy Preset
It becomes convenient for the customers to program the TV using the remote control unit and detailed OSD of the
TV set. Please follow the procedures below to start tuning.
1
Press the MENU button to display menu. Press the
cursor buttons to select the Setup option.
2
Press the ENTER button to enter the Setup menu.
Press the
cursor buttons to select the Easy Preset
option.
3
Press the ENTER button to enter the Easy Preset menu.
Press the
cursor buttons to select the Sound System
option then press the
required sound system in your area or set it to the Auto
mode (shown on the right).
Now press the
Program option, then press the ENTER button to begin the
auto tune procedure. The character Searching appears at the
bottom of menu, and the TV will begin the auto search
procedure and store all signals available in the area or
CATV.
You can interrupt it by pressing the ENTER button in the
process of searching.
The set will exit menu display mode automatically after searching is finished.
Notes: 1 If you want to arrange the programs obtained by All Program, please refer to the Tuning section on
page 23.
2 If your equipment (such as VCR, GAME MACHINE) only has RF output, connect it with RF cable
into the antenna input of the TV set, and refer to the Tuning section on page 23 for presetting.
3 When you are in video mode (AV1, AV2, etc. ), accessing the Easy Preset menu will enable the TV
to switch to RF mode automatically. This is normal.
cursor buttons to select the
cursor buttons to select the All
15
Advertisement
Table of Contents
