ON-SCREEN DISPLAY MENU FUNCTION MENU
Function Menu
Function menu allows you to select scan mode, multi picture mode etc. Please follow the steps below.
1
Press the MENU button to display the menu.
Press the
cursor buttons to select the Function
option as shown on the right.
2
Press the ENTER button to enter the Function menu.
Press the
cursor buttons to select the Scan Mode option
as shown on the right.
Note: The menu of the C43-FL9000 model as shown on the
right does not include the TV P.Size option and the
Auto P.Size option.
3
Press the ENTER button to enter the Scan Mode menu
as shown on the right.
You can press the
scan modes to improve picture effect.
1 For PAL or SECAM system you can select scan mode
from 100Hz,Virtual HD or Progressive.
2 For NTSC system, you can select scan mode from
Virtual HD or Progressive.
3 When the input signal format is 480p signal, the scan
mode setting will be fixed at Progressive.
4 When the input signal format is 576p signal, you can
select scan mode from 100Hz or Progressive. The 100Hz
mode can eliminate flicker.
5 When the input signal format is 1080i/60 or 720p/60 HD signal, the scan mode setting will be fixed at HD.
6 When the input signal format is 1080i/50 HD signal, you can select scan mode between 100Hz or HD. The
100Hz mode can eliminate flicker.
cursor buttons to select different
Scan Mode
21