Advanced Chipset Control - Supermicro Supero 5015B-MR User Manual

S S
UPER ERVER 5015B-MR User's Manual
Set Maximum Ext. CPUID=3
When set to Enabled, the Maximum Extended CPUID will be set to 3. The options
are Disabled and Enabled.
Echo TPR
Set to Enabled to prevent xTPR messages from being sent to the system.The
options are Disabled and Enabled.
C1 Enhanced Mode
(Available when supported by the CPU.)
Set to Enabled to enable Enhanced Halt State to lower CPU voltage/frequency to
prevent overheat. The options are Enabled and Disabled. Note: please refer to
Intel's web site for detailed information.
Intel <R> Virtualization Technology
(Available when supported by the
CPU.)
Select Enabled to use the feature of Virtualization Technology to allow one platform
to run multiple operating systems and applications in independent partitions, creating
multiple "virtual" systems in one physical computer. The options are Enabled and
Disabled. Note: If there is any change to this setting, you will need to power off
and restart the system for the change to take effect. Please refer to Intel's web
site for detailed information.
No Execute Mode Memory Protection
(Available when supported by
the CPU and the OS.)
Set to Enabled to enable Execute Disable Bit and allow the processor to classify
areas in memory where an application code can execute and where it cannot, and
thus preventing a worm or a virus from inserting and creating a fl ood of codes to
overwhelm the processor or damage the system during an attack.
Note: this feature is available when your OS and your CPU support the function
of Execute Disable Bit. The options are Disabled and Enabled. Note: For more
information regarding hardware/software support for this function, please refer to
Intel's and Microsoft's web sites.
Enhanced Intel Speed Step Support
(Available when supported by the
CPU.)
Select Enabled to use the Enhanced Intel SpeedStep Technology and allows
the system to automatically adjust processor voltage and core frequency in an
effort to reduce power consumption and heat dissipation. The default setting is
GV1/GV3. Please refer to Intel's web site for detailed information.
Advanced Chipset Control
Access the submenu to make changes to the following settings.
7-10