Checking The Motherboard Setup - Supermicro Supero 5015B-MR User Manual

S S
UPER ERVER 5015B-MR User's Manual
Figure 2-5. Installing the Server into a Telco Rack: Basic
2-6

Checking the Motherboard Setup

After you install the 5015B-MR in the rack, you will need to open the unit to make
sure the motherboard is properly installed and all the connections have been
made.
Accessing the Inside of the System (Figure 2-7)
1. Grasp the two handles on either side and pull the unit straight out until it
locks (you will hear a "click").
2. Remove the screws from the lips on either side of the chassis top cover,
located at the front of the chassis.
2-8