Console Redirection; Flow Control; Console Connection - Supermicro Supero 5015B-MR User Manual

S S
UPER ERVER 5015B-MR User's Manual
Console Redirection
Access the submenu to make changes to the following settings.
COM Port Address
This item allows you to specify which COM port to direct the remote console to:
Onboard COM A or Onboard COM B. This setting can also be Disabled.
BAUD Rate
This item allows you to set the BAUD rate for the console redirection. The options
are 300, 1200, 2400, 9600, 19.2K, 38.4K, 57.6K, and 115.2K.
Console Type
This item allows you to set the console redirection type. The options are VT100,
VT100/8bit, PC-ANSI/7bit, PC ANSI, VT100+, VT-UTF8 and ASCII.

Flow Control

This item allows you to select the fl ow control option for the console. The options
are: None, XON/XOFF, and CTS/RTS.

Console Connection

This item allows you to decide how console redirection is to be connected: either
Direct or Via Modem.
Continue CR after POST
This feature allows you to decide if you want to continue with console redirection
after the POST routine. The options are On and Off.
7-18