Readyshare Access - NETGEAR DGN2200v4 Installation Manual

a. Turn off the modem router.
b. Unplug the power adapter and all other cables from the back
of the modem router.
c. Wait 30 seconds, then reconnect the cables and adapter to
your modem router, and turn it on.
d. Make sure that the Power LED is lit. If the LED is off, try
plugging the power adapter into another power outlet.
e. Wait for the LEDs to light green.
3. Open a web browser and try to access the Internet.
If steps 1–3 do not resolve the problem:
4. Reset your modem router.
To reset your modem router, use a pin or paper clip to press in
and hold the Reset button (accessed through a small hole).

ReadySHARE Access

After installation and setup, insert a USB storage device into the USB
port on the modem router to share its contents with other network
users. (If your USB device has special drivers, it is not compatible.)
If your USB device requires a power supply, use it when connecting
your USB device to the modem router. It takes up to 2 minutes before
the USB drive is ready for sharing.
For more about ReadySHARE, visit www.netgear.com/readyshare.
11