Troubleshooting - NETGEAR DGN2200v4 Installation Manual

N300 wireless adsl2+ modem router
Hide thumbs Also See for DGN2200v4:
Table of Contents

Advertisement

To change the password for the modem router user name:
1.
Log in to the modem router.
2.
Select Advanced > Administration > Set Password.
3.
Type your old password.
4.
Type the new password twice
5.
Click Apply.

Troubleshooting

If the browser does not display the web page:
Make sure that the computer is connected to one of the available
LAN Ethernet ports, or wirelessly to the modem router.
Make sure that the modem router has power and that the WiFi
LED is lit.
If the computer is set to a static or fixed IP address (this is
uncommon), change it to obtain an IP address automatically from
the router.
If the modem router does not power on:
1.
Check your cables.
Disconnect and reconnect each cable.
See if the telephone cable connecting your DSL modem
router to the wall jack is plugged into a filter. A filter is not
required if you do not have telephone voice service. A filter
installed where it is not needed might eliminate your ADSL
signal.
2.
Power down your modem router and power it up again.
10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents