Table of Contents
Advertisement
Troubleshooting
If the browser does not display the web page:
•
Make sure that the computer is connected to one of the four LAN
Ethernet ports, or wirelessly to the router.
•
Make sure that the WiFi LED is solid green.
•
Close and reopen the browser to make sure that the browser
does not cache the previous page.
•
Type http://routerlogin.net.
•
If the computer is set to a static or fixed IP address (this condition
is uncommon), change it to obtain an IP address automatically
from the router.
ReadySHARE Access
After installation and setup, you can insert a USB storage device into
the USB port on the router and share the contents with other network
users. (If your USB device has special drivers, it is not compatible.)
Note:
If your USB device requires a power supply, you must use it
when connecting your USB device to a NETGEAR router or gateway.
It might take up to 2 minutes before the USB drive is ready for sharing
after it is connected to the router.
To access your USB device:
On Windows systems, use any of these methods:
•
Select Start > Run and enter \\readyshare in the dialog box.
Click OK.
•
Open Explorer or Safari and enter \\readyshare in the address
bar.
•
Open My Network Places and enter \\readyshare in the address
bar.
9
Advertisement
Table of Contents
